ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380 G4: IPCONFIG /all show hexadecimal (or IPv6) numbers for IP address

 
Highlighted
New Member

DL380 G4: IPCONFIG /all show hexadecimal (or IPv6) numbers for IP address

I just recently had my systemboard replaced on Proliant DL380 G4 server. When I do an IPCONFIG /all I am receiving the following:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP NC7782 Gigabit Server Adapter #2
Physical Address. . . . . . . . . : 00-14-38-C0-35-3B
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.75.102.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . : fe80::214:38ff:fec0:353b%5
Default Gateway . . . . . . . . . : 10.76.102.254
DNS Servers . . . . . . . . . . . : 10.76.102.1
10.76.102.2
10.72.102.1
10.72.102.2
fec0:0:0:ffff::1%2
fec0:0:0:ffff::2%2
fec0:0:0:ffff::3%2

I am also seeing that IPv6 is enabled as one of the network connection properties as well as TCP/IP. Does anyone know what this means? Do I maybe need to check the NIC card driver?
1 REPLY 1
Highlighted
Honored Contributor

Re: DL380 G4: IPCONFIG /all show hexadecimal (or IPv6) numbers for IP address

Hi Trimaine:

there is a customer advisory from HP that I found:

CUSTOMER ADVISORY
Document ID: EM050203_CW02
Version: 2
IPMI May Cause The MAC Address Of The NC7782 Dual Port PCI Gigabit Server Adapter To Be Read Incorrectly On ProLiant G4-Series Servers When Configured For NIC Teaming
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EM050203_CW02

-
CUSTOMER ADVISORY
Document ID: CO041216_CW01
Version: 0
NIC Team May Generate A Fault During Initialization Due To An RX Path Failure And Set The IP Address To 0.0.0.0
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_CO041216_CW01

- go over them and see if they can assist you.

Best regards,

Tarek.
Hey, look a light at the end of the tunnel.