E60 - new installation

[Nanjangud Srikanta]

I have HP E60 server with 512 MB. I want to test a hard drive (it has windows 2000 server and an application already installed) on this server. How do I go about booting from the hard drive - the system does not let me do that. Any ideas?

[CA1036363]

Need more information. Your message is not clear.

First of all make sure that you are using SCSI drives. SCSi drives use SCSI ID's for boot priority. SCSI ID 7 is usually for the controller. When the system boots you should see the boot priority during the BIOS startup.

Hope that helps.

[Nanjangud Srikanta]

David,

Thanks for the information. The drive is not a Scsi drive.

[CA1036363]

IDE harddrives are NOT supported on the E60. You must use SCSI drives.

[Nanjangud Srikanta]

David,
Thanks for the info.