Error boot HP Microserver GEN8 AHCI

[NickBv]

Hi,

I have a HP Microserver GEN8 and I disabled HP120 Array with 4 HDD installed and 1 SSD installed on cdrom bay.

I chose AHCI from bios.

I installed Centos and I have:
/dev/sda
/dev/sdb
/dev/sdc
/dev/sdd
/dev/sde (This is SSD drive)

Please, How can chose in bios to select boot device SSD (/dev/sde) ?

I don't find in bios an optios to select wich hard disk select to boot !!!



Regards,