ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure HP PDR Management Module

 
Highlighted
New Member

How to configure HP PDR Management Module

We have about 30 HP 1500 UPS Installed with a HP PDR Module (this module allows the UPS to be connected to the network). The problem i have is the HP PDR module goes offline and we lose access to UPS located at remote locations.

I have got a serial cable connected between the server and the PDR module to access service menu but can only reset module by pressing a reset switch at the back of the PDR module.

Question is whether i can reset PDR module and / or access service menu without having to press the reset switch on the back of the PDR module.
1 REPLY 1
Highlighted
Trusted Contributor

Re: How to configure HP PDR Management Module

Samson,

Sorry, you can't because the module stops responding and that's how you are forced to reset and its always a hardware reset, Logically even if you have a software option it would work only when it communicates with PDR.