HP Micro G7 N54L can use memory HP 2GB 2Rx8 PC3-10600R or not??

[Narinthorn]

Hi! HP

I have HP Micro G7 N54L but I bought HP 2GB 2Rx8 PC3-10600R P/N:500202-061 2 items.

I replace old memory 10600E with 2*10600R (Dual).

When I power on server cannot boot. It seem server cannot vision memory and When I use single memory it was same problem if use 10600E single server can start normaly.

Can I use memory 10600R for my server ?

Thank you for response.

[Lincy_Zachariah]

Hi,

As per quick specks following are the supported Memory Modules:

1GB PC3-10600E UDIMM - Spare Part No - 501539-001
2GB PC3-10600E UDIMM - Spare Part No - 595101-001
4GB PC3-10600E UDIMM - Spare Part No - 595102-001

Click here to access HP ProLiant MicroServer quick specs.

Hope this information helps.

Thanks & regards,

Lincy

[Narinthorn]

Hi, Lincy Zachariah

I cannont open link.

thank you :)

[Dennis Handly]

>I cannot open link.

Instead of trying to be fancy and use hyperlink button, sometimes it is just better to paste it on a new line:  :-)

http://h18004.www1.hp.com/products/quickspecs/13716_div/13716_div.HTML#Memory

If Lincy wants to fix the link, it has "http" twice.  And can be edit with Post Options > Edit Reply.

[Xqzit]

Hello @Narinthorn,

Your server supports only Unbuffered ECC memory (PC3-****E) and it does not support Registered ECC sometimes referred as RDIMM (PC3-****R). Hence,  PC3-10600R will not work.

Your server supports a max memory of 8GB. It has 2 sockets and max per socket is 4GB.

Following are the list for compatible memory:

HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 593923-B21 HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit 593921-B21 HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit

You can find this memory on some ontine memory retailers like memorystock.com and crucial.com.

Good luck with the upgrade!! Cheers

[Mondoman]

With the introduction of higher-capacity ECC DIMMs, many folks have been able to expand their N54L microservers to 16GB RAM total.  I've successfully used Kingston KVR1333D3E9SK2/16G DDR3-1333 16GB(2x 8GB) 1Gx72 ECC CL9 Server Memory Kit.