HPE Community
ProLiant Servers - Netservers
1751868 Members
5355 Online
108782 Solutions
New Discussion

HP Proliant ML370 G5 Server boot to cd

 
Royce Cozine
New Member

‎01-25-2009 12:10 PM

‎01-25-2009 12:10 PM

HP Proliant ML370 G5 Server boot to cd

I have installed Netware 6.5 SP7 on this server. I want to access the Smart Start cd. The directions say put it in shut it down and restart and it will boot to it. Mine does not. It keeps booting up to my operating system. Is there a way to force a cd boot with this server.
0 Kudos
Reply
1 REPLY 1
Kedd Guyton
Respected Contributor

‎01-26-2009 05:29 AM

‎01-26-2009 05:29 AM

Re: HP Proliant ML370 G5 Server boot to cd

Insert the bootable SmartStart CD. Power on or reboot the server. Press the F9 key when prompted to enter the RBSU (ROM-Based Setup Utility). Adjust the boot order placing the optical drive before the hard drive. Reboot again, and it should launch SmartStart. If it doesn't the optical drive may be faulty or the CD may not have been burned correctly.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.