ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

internel health led shows red

 
Highlighted
New Member

internel health led shows red

my server ml370 g2 internel health led on the front panel shows red whenever i power on the server,this causes the server not to boot.after removing the power cord and leaving it for 30 to 45 mins then powering it on it wil then boot. pls how can i solve this problem and the cause of it.

thanks for your help.
2 REPLIES 2
Highlighted
Honored Contributor

Re: internel health led shows red

Hi Solomon:

How many power supplys are installed on the server
- is this the hotplug power supply
- If So:

Please remove both power supplys and check the revision # on them

they should be over REV: 06

- If They are below that then they need to be replaced.

Best regards,

Tarek.
Hey, look a light at the end of the tunnel.
Highlighted
Honored Contributor

Re: internel health led shows red

Sorry REV: 06 is Good; 06 is included. but not below that.

Hey, look a light at the end of the tunnel.