ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

ML150 and SCSI Adaptec 2120S

 
Highlighted
New Member

ML150 and SCSI Adaptec 2120S

I recently purchased a ML150 with 2120S RAID controller.
I've found that installing the HP Storage Manager tools (aka Adaptec Storage Manager) with Windows 2003 SP1 will cause the system to BSOD during boot time. The only cure is to uninstall the software or disable the service.

Adaptec seems to have updated software available on their website, but I cannot download it because I have an OEM card.

Has anybody else seen this problem or know of a workaround? I want to have the software running so I can be alerted when a drive fails etc.
1 REPLY 1
Highlighted
New Member

Re: ML150 and SCSI Adaptec 2120S

I've set the Storage Manager service to Manual and now I can boot into the OS.
If I run the software however I usually get a BSOD.