cancel
Showing results for 
Search instead for 
Did you mean: 

ML150G6

 
Highlighted
Advisor

ML150G6

I installed Small Business Server 2003/32bit on this 64bit server. Actually, what I did was use Acronis Advanced Backup&Restore with Universal Restore for Small Business Server. I created an image backup and restored it to the server. With Universal Restore, it should be able to do this to dissimilar hardware. However, I ran into a problem that I believe is a result of differences between the 32bit drivers on the image and the 64bit (new) platform. I need the Small Business Server 2003 drivers (primarily Mass Storage). where can I get them?
2 REPLIES 2
Highlighted
Trusted Contributor

Re: ML150G6

Here we Go,

While doing Acronis Universal restore, When you get a third part mass storage / SCSI controller river selection screen, provide this driver

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3884323&prodNameId=3884324&swEnvOID=1005&swLang=13&mode=2&taskId=135&swItem=MTX-75510b2b1248405cb6915c29f8

Also Out of my experience if you don't get the page to select extra SCSI drivers then it's bug in acronis, you may need to prepare another Universal restore boot Disk, check the latest update for Acronis or post it in Wilder security forum.
Highlighted
Advisor

Re: ML150G6

thanks very much. I'll give it a try.