ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Need Help: 1615 - Power Supply Failure in Bay 2

 
Highlighted
New Member

Need Help: 1615 - Power Supply Failure in Bay 2

Hi,

Our company has a Proliant DL380. Yesterday I replaced the CDRom with a DVD-RW. During the replacement, I turned off the power. After the DVD-RW was installed, there was an error during booting.

The error line came after the processors are initialized. And the error line reads: 1615 - Power Supply Failure in Bay 2.

After I press F1 to continue, I can boot into Windows 2K without problem. The bays are showing as following:

Bay 3: LED-off
Bay 2: LED-green
Bay 1: LED-green
Bay 0: LED-green

Please help! I'm new to SCSI drives.

Max
2 REPLIES 2
Highlighted
Frequent Advisor

Re: Need Help: 1615 - Power Supply Failure in Bay 2

you should be haveing redundent power supply.
Check the power cables connected to the server
Replace or check the specified power supply,
Highlighted
New Member

Re: Need Help: 1615 - Power Supply Failure in Bay 2

Thanks. It is the problem.