ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Not able to boot without human interaction

 
Highlighted
New Member

Not able to boot without human interaction

I have a Proliant ML370 G2, Windows 2000 server that only boots with user intervention. I restart the server, the system goes through it's post, but gets to a menu where I can press F1 to continue, press F9 for ROM utility, press F10....

before the system would boot up automatically. I've updated the System BIOS, and the Smart Array 5300 Controller.
1 REPLY 1
Highlighted
Valued Contributor

Re: Not able to boot without human interaction

This usually happens when there is an issue such as a failed drive, a drive not configured in your array, dead battery on the array controller or some other sort of error.

Can you posst a screen shot of what you see? If the server has ILO you can take a screenshot of the ilo window