ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Pavilion ML150 G2 RAID Issue with beep sound all the time

 
Highlighted
New Member

Pavilion ML150 G2 RAID Issue with beep sound all the time

Hi,
I have this server and it's making a beep all the time, it doesn't stop until I shut down the computer and when I turn it on I get this message
"Following Arrays have missing or rebuilding or failed member and are degraded.
Array#0-RAID5"

I check the system log and I found this error:
Source: aac
Event ID:9
The device,\Device\SCSI\aac1 did not respond within the timeout period.

I'm not very familiar with RAID configurations and I don't know how to fix it. Is it just I need to change the drive and that will be all?
Any help?? I will really appreciated.
2 REPLIES 2
Highlighted
New Member

Re: Pavilion ML150 G2 RAID Issue with beep sound all the time

I was able to resolve my server problem by replacing a bad HD in the raid. They were hot swap drives, which means you can replace it without turning the server off, and it will start to rebiuld on its own. I found the bad drive by going into the raid configuration tool to see which drive was bad. Hope that helps.
Lisa
Highlighted
New Member

Re: Pavilion ML150 G2 RAID Issue with beep sound all the time

Thanks Lisa,
the configuration tool is the one you access before log on to windows with Ctrl + key ??

where did you buy your HD??
Thanks in advance!!