ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant DL 380 G4 startup error

 
Highlighted
New Member

Proliant DL 380 G4 startup error

Hi,

I have some trouble with a Proliant DL 380 G4 p/n:370596-421
We had some electricity problems yesterday and for a long the time, after 1 hour the server gone off.
After several hours everything became normal with electricity, but the server didn't start.
The leds were all grenn, HDD-leds on but nothing hapened.
After 10 minutes I shot the server off by holding the power-on button and restarted it again. At that moment the server started normally.
I tried again plug the power-cord and the same problem hapened.

Can anyboby please help me
1 REPLY 1
Highlighted
Trusted Contributor

Re: Proliant DL 380 G4 startup error

It is possible you had a clamped power supply from your power outage. In situations like that I usually remove power completely (disconnect the power cord) and reseat the power supply (or both supplies if you have the second one). This will usually take care of this type of problem.

Allan