ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

PROLIANT GEN 8 - Display Issue

 
Highlighted
New Member

PROLIANT GEN 8 - Display Issue

I had my micorserver running perfectly. Then, after moving house, I am unable to get a display at all through the standard VGA port. Just a green light on the power button and beep as it always sounded when booting up.

Help please

1 REPLY 1
Highlighted
Honored Contributor

Re: PROLIANT GEN 8 - Display Issue

HAve you tried a different monitor just to make sure the monitor hasn't quit working?  You could also connect ot the iLO port and look in the server logs, or access the remote console port to see the boot.  Since you have no video, you will need to look at your DHCP server to figure out the iLO IP address.

No support by private messages. Please ask the forum!