Proliant ML310 Unsupported PCI Device

[Gary Browne_1]

I have a brand new ML310 G2 server. In attempting to install a second 3Com NIC the server will not boot and a "System Halted" error is reported along with "Unsupported PCI Dvice Installed, Please Remove PCI Device"
Any suggestions please?

[CA1076661]

The following are the NIC supported by the server.

HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter 367132-B21
HP NC310F PCI-X 1000SX Gigabit Server Adapter 368169-B21
HP NC320T PCI Express 1000T Gigabit Server Adapter 367047-B21
HP NC1020 PCI 1000T Gigabit Server Adapter 353377-B21
HP NC6170 PCI-X Dual Port 1000SX Gigabit Server Adapter 313879-B21
HP NC7170 PCI-X Dual Port 1000T Gigabit Server Adapter 313881-B21

HP NC7771 PCI-X 1000T Gigabit Server Adapter

290563-B21

HP High-speed PCI soft modem
NOTE: RJ11 modem adapter is not included. DC132D
NOTE: NC61XX, NC71XX, NC77XX, or NC1020 network adapter (NIC) can be used for redundancy with the embedded NC7761 NIC. When either the embedded NC7761 or the NC1020 is teamed with other HP NICs, Jumbo Frames and LSO features are automatically disabled.