ProLiant Servers - Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant ML350 WinNT4.0 can't find scsi Harddisk

 
Highlighted
New Member

Proliant ML350 WinNT4.0 can't find scsi Harddisk

Hi,
I have a Proliant ML350 with WinNT4.0 server. Due to harddisk crash, I have to reinstall it. I run by SmartStart5.5 and follow by WinNT4.0 Server. I load cp002886 (32bit SCSI drive for NT4.0) and it accepted it but when NT is copying the program it shows no harddrive has been detected. I've tried out other drives on the website but the problem is still there. I've tried it out with the same procedure with Win2000 and loaded with cp003193 and selected "Compaq Integrated Wide Ultra2 SCSI Controller" then it was successful. Anybody can give me solution?
1 REPLY 1
Highlighted
Frequent Advisor

Re: Proliant ML350 WinNT4.0 can't find scsi Harddisk

Are you letting the smart start cd do an automatic build it will select the correct drivers and is a lot less fuss than customized Give it a go if you havent yet