ProLiant Servers - Netservers
1819778 Members
3295 Online
109607 Solutions
New Discussion юеВ

Re: replacement fan for Proliant Microserver Gen 10 plus v2

 
bureaucrat359
Occasional Visitor

replacement fan for Proliant Microserver Gen 10 plus v2

Hi everyone,

has anyone an idea what fans can be used as an alternative to the built-in system fan (part number P19422-001) ? The original fan is not available anymore as it was discontinued. Especially the 6-pin-connector seems to be not too common...

2 REPLIES 2
Jarvisstark01
Advisor

Re: replacement fan for Proliant Microserver Gen 10 plus v2

You might have luck with Noctua or Delta fans with similar specs, but the 6-pin connector is tricky. Some people adapt standard PWM fans using a custom wiring harness or an old connector from a dead fan.

bureaucrat359
Occasional Visitor

Re: replacement fan for Proliant Microserver Gen 10 plus v2

Ok, many thanks for the advice. I was afraid of something like this. Really bad service by HP. Using proprietary fan connectors and then not offering any replacement...