RHEL 3 ES don't recognize MSA60 array

[ENRICO MORELLI]

Dear all,

I have a DL380G5 connected to an MSA60 equipped with 7 HDD SATA 500GB. I'm unable to use the volume created on MSA60 disks under RHEL 3 ES.

During the boot I have:

HP CISS Driver (v 2.4.64-7)
cciss:Smart Array P400 is at irq 18
cciss: not using DAC cycles
blocks= 286677120 block_size= 512
heads= 255, sectors= 32, cylinders= 35132 RAID 1(1+0)

blk: queue c0504020, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2
blk: queue c050ba00, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
cciss:Smart Array P800 is at irq 18
cciss: not using DAC cycles
blocks= 0 block_size= 512
heads= 255, sectors= 32, cylinders= 0 RAID ADG

As you see, the driver is unable to recognize the size of the volume. I installed also the psp 7.40 without success.
Some can help me?

Thanks
Enrico Morelli