BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

New Member

BL460 G1 Second Processor option

After installing the 2nd processor, the server will not boot. The power button light remains amber, and all of the other LEDs are off.

OA shows the server as being turned off, and when I attempt to power on, it shows on, then immediately turns off.

If I remove the 2nd processor the server powers on, and boots just fine. I have tried multiple kits, and all of the processors work in single config, but the server will not power on with any combination of the two.

Firmware:
ILO is latest, System ROM is latest, Power Management Controller is latest. Not sure what else could be causing this. I have 2 other identical blades running dual CPU configs just fine in the same C3000 enclosure.
Who Me Too'd this topic