BladeSystem - General
cancel
Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

Occasional Visitor

C7000ilo2 Auto login failing when connecting to the integrated remote desktop.

Having a little trouble with a C7000 blade chasis where the blades in slots 1-4 connect ok through ilo2 however when trying to connect to a blade in slots 9-12 its displaying a login page.

 

Have tried the following:

reapply the firmware 2.41, even upgraded to 2.60

reset ILO2 controller

recreated the Web Certificate

removed the blade

re confirmed the enclosure bay IP adresses..

can ping the ilo2 port through CLI

 

so am a little lost now what to try next.

 

Can anyone help?

 

Have attached a screenshot to show you what I mean, doesn't even look correct!!!

 

Thanks

Who Me Too'd this topic