HPE Community
Aruba & ProVision-based
1753332 Members
5433 Online
108792 Solutions
New Discussion

Who Me Too'd this topic

HPGuruUK
Occasional Advisor

‎08-27-2011 03:18 PM - last edited on ‎05-07-2014 06:32 PM by

‎08-27-2011 03:18 PM - last edited on ‎05-07-2014 06:32 PM by

RADIUS not working on core (5406zl)

Hi,

 

I am having problems with setting up RADIUS on my core swtich, its odd because it was working a few weeks ago but now it just doesnt want to work.

 

It works on my edge switches fine! (2510g) but my core just doesnt want to play ball, config below:

 

aaa authentication console login radius local

aaa authentication console enable radius local

aaa authentication web login radius local

aaa authentication telnet login radius local

aaa authentication telnet enable radius local

aaa authentication ssh login radius local

aaa authentication ssh enable radius local

radius-server host 10.44.10.1 key s3cr3tm3 auth-port 1645 acct-port 1646

radius-server host 10.55.10.2 key s3cr3tm3 auth-port 1645 acct-port 1646

radius-server timeout 3

radius-server retransmit 1

I know my RADIUS Server is working as my edge switches work fine with radius!

 

when i put my username\password in i just get cannot contact radius server!

 

 

P.S. This thread has been moved from Web and Unmanaged to ProCurve / ProVision-Based. - Hp Forum Moderator

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.