HPE Community
MSA Storage
1753846 Members
7798 Online
108807 Solutions
New Discussion

Who Me Too'd this topic

Dan61
Occasional Contributor

‎08-01-2012 06:08 AM

‎08-01-2012 06:08 AM

MSA1000 connection Issues

Good Day, I hope I'm posting to the right area.  I have a Microsoft 4 node cluster running 2003 server.  The servers are DL380 G5 and I have one MSA1000 Raid.  My problem is 2 of the servers have lost connection to the MSA.  I ran the ACU and the MSA is missing Node A and B, nodes C and D are fine.  I have replaced the following: both FC cards on the DL's the Transceivers on the MSA and tried a new Fiber cable.  Also replaced the 8 port FC switch still no luck.  Now on Node B if I restart the server I can connect to the MSA this will last for about 1 to two hours and then it it lost.  I ran the ACU diagnostics when I was connect and it show  OK, When it was gone it shows error MSA not connected.  What makes this really hard, it is at a remote site (white Horse and the Tech there is not a lover of HP)  I really need help not sure where to go next.  I have a system here in Ottawa that I can pull the Controller out of the MSA If need be.

 

Dan

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.