HPE Community
BladeSystem - General
1753666 Members
5931 Online
108799 Solutions
New Discussion

Who Me Too'd this topic

dennyaaa
Frequent Visitor

‎09-24-2012 02:32 AM

‎09-24-2012 02:32 AM

Windows PXE boot for HP Proliant 2012xx fails to mount filesystem.

Hello everyone. I am having a seriouse problem with the HP proliant 201208.iso and our windows PXE enviroment. Ever since I upgraded from  the 201202 pack I get a "failed to mount filesystem" after the HP picture hangs on screen for half a minute. We are running a simple PXE boot enviroment and this is the pxelinux.cfg default file out put:

 

 

label f9
menu label ^9) HP Firmware Update
kernel HPFWU201208/vmlinuz

append initrd=/HPFWU201208/initrd.img media=cdrom rw root=/dev/ram0 ramdisk_size=900000 init=/bin/init loglevel=3 ide=nodma ide=noraid nopat pnpbios=off vga=791 splash=silent hp_fibre showopts noexec32=off numa=off nox2apic TYPE=MANUAL AUTOPOWEROFFONSUCCESS=no iso1mnt=/mnt/bootdevice iso1=nfs://[path to server holding the iso file]/preload2/hppxe/HP_Service_Pack_for_Proliant_2012.08.0-0_703859-001_SPP_2012.08.0-SPP2012080.2012_0730.60.iso

 

I have tried almost everything which is very fustrating since it just worked up untill 201202. Anyone having the same issue? Or even a solution?

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.