HPE Community
Web and Unmanaged
1752794 Members
6571 Online
108789 Solutions
New Discussion

Who Me Too'd this topic

rumpelzeinchen
Occasional Contributor

‎12-10-2013 07:18 AM

‎12-10-2013 07:18 AM

Changing VLAN Interface on 1910

Hello,

 

when I configure more that one VLAN Interfaces on a 1910, I loose web access as soon as I remove the first configured one.

 

Long version:

I have a 1910 with 4 VLANs on it. I configured one port as a trunk port as described in the manual. I can ping and access client computers and cameras on different VLANs on this switch. The switch is completely usable. Then I want to manage the switch from a different VLAN. I create a VLAN Interface for VLAN4 with an IP that is reachable everywhere on my 60+ client network. I can ping that IP, but only as long as the VLAN1 Interface exists. When I delete this one, I lose BOTH pings and cannot manage my switch. What is going wrong here?

 

Thanks

B

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.