HPE Community
Aruba & ProVision-based
1753818 Members
8852 Online
108805 Solutions
New Discussion

Who Me Too'd this topic

fredd33
New Member

‎09-24-2014 01:43 PM

‎09-24-2014 01:43 PM

configure sflow on procurve hp5400zl

Trying to configure sflow on HP 5400 and not sure how to enter config lines for ports. Configured HP 2910 using 1-48 for config line for ports but 5400 has both tagged and untagged ports and are listed in this manner:

untagged A1-A24,B1-B24,C1-C24,D1-D24,E1-E22,F4-F21,F24-G24,L1-L22,Trk1
no untagged E23-E24,F1-F3,F22-F23

untagged E23-E24,F1-F3,F23
tagged A4-A24,B1-B24,C1-C24,D1-D24,E1-E22,F4-F18,F20-F22,F24-G24,L1-L22,Trk1
voice

Ports are on these type modules:
module 1 type J8702A
module 2 type J8702A
module 3 type J8702A
module 4 type J8702A
module 5 type J8702A
module 6 type J8702A
module 7 type J8702A

Any help would be extremely appreciated.

Fernando dela Garza

1 person had this problem.
0 Kudos
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.