HPE Community
HPE OneView
1753770 Members
5258 Online
108799 Solutions
New Discussion

Who Me Too'd this topic

JSmid
Advisor

‎11-24-2015 04:51 AM

‎11-24-2015 04:51 AM

Locked alert will not clear

I have one enclosure in OneView that is having some problems. At some point about two months ago OV lost connection to the ILO of the blades and threw an alert, this alert will not clear.

"Network connectivity has ben lost for server hardware *****, bay 9. Resolution: Check and restore network connectivity to the management processor. Refresh the server."

Since this alert appeared,I have tried several things to clear this alert but I cannot get it to clear. Things i have tried.

Reset the ILO

Reset the blade

Refresh the enclosure

Refresh the hardware

Re-Apply the HW profile

Change a setting in the profile

Update the firmware on the blade and the enclosure

Everything works, but i cannot get this alert to clear. Any help would be appreciated.

In the meantime, i've also updated from 1.20.5 to 2.0 which did not solve it.

 

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.