Servers - General

Who Me Too'd this topic

Occasional Contributor

HPE Metered PDU - Configuration issues


I have 14 of the HP G2 Series PDU's (model P9R54A) and cannot set the Time Offset to 1 hour under Daylight Savings.  I can set it to 30 mins but not the 1 hour I require.  The option for 1 hour is there, which I select, but after logging out and back in, it doesn't pick up the changes.  It also seems a bit flakey as other settings under daylight savings seem to revert back to deafult or the funtion itself switches off.

I have upgraded the Firmware to

NTP server has been set and works, picks up the date & time - albeit 1 hour behind.

Any suggestions would be appreciated.





Who Me Too'd this topic