Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Who Me Too'd this topic

Helix42
Visitor

Aruba VSF High Port Counters

Hi,

i configure a VSF on 2 HP Aruba Switches.

It works fine but the interface counter  increases permanently extremely.

   member 1
      link 1 1/A1
   member 2
      link 1 2/A1

port-speed 40g

                                                               Flow Bcast
  Port         Total Bytes    Total Frames   Errors Rx Drops Tx  Ctrl Limit
  ------------ -------------- -------------- --------- --------- ---- -----
1/A1         1,549,676,185  1,629,998,889  0         0         off  0

2/A1         900,798,200    1,619,989,198  0         0         off  0

 

5 seconds later

Port         Total Bytes    Total Frames   Errors Rx Drops Tx  Ctrl Limit
  ------------ -------------- -------------- --------- --------- ---- -----
  1/A1         2,447,304,020  1,644,021,925  0         0         off  0

  2/A1         1,798,332,633  1,634,010,828  0         0         off  0

Is that normal?

1 GByte in 5 seconds??

The other interfaces are blank

I didn't find anything in the HP notes about that.

Who Me Too'd this topic