HPE Community
ProLiant Servers (ML,DL,SL)
1752806 Members
6271 Online
108789 Solutions
New Discussion

Who Me Too'd this topic

mardenit
Occasional Contributor

‎12-16-2019 05:26 AM

‎12-16-2019 05:26 AM

Only LUN0 visible on SAS connected server

Hi All,

We have purchased 2 x DL380 40 core servers both with HPE E208e-P SR dual port 12gbps SAS controllers.

We purchased an Infortrend GSa2024RT SAN with dual 12Gbps SAS controllers.

Currently I've got one server connected to one of the ports on the SAN.

I've created two disks on the SAN and mapped them to the controllers.

When I go into my Server 2019 disk manager screen however I see only 1 disk.

From doing some experimenting, it appears that only drives that are mapped as LUN0 appear on the server.

I'm completely stumped, anyone got any ideas ?

 

Paul.

1 person had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.