BL460c ILO2 problem after firmware (ROM flash) upgrade to 1.70

[acartes]

Discussed in this Customer Advisory:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01802766

[Lieven Verdonck]

I have firmware 1.78 and driver version 1.15 and i still get the crashes described in the custom advisory. Problem still exist.

The system has been rebooted since the upgrade of the driver.

Anyone else still has problems? Looks like a major issue to me.

[Lieven Verdonck]

Ignore my last reply, I have only updated the HP iLO Management Channel Interface Driver to version 1.15, but I have forgotten to update the HP Proliant iLO 2 Management Controller Driver to version 1.12 (found initially under System Devices in the Device Manager with older drivers (mine were 1.4))

[KarimK]

Hi,

I am still having this problem altough i have updated my firmware to the latest version.

HP iLO Management Channel Interface Driver 1.15.0.0
HP ProLiant iLO 2 Management Controller Driver 1.12.0.0

Compaq Remote Insight ROM 1.79

Does anyone have any ideas? as it seems HP haven't got a clue.

[James Kennedy_4]

KarimK

What are your symptoms now, still getting both the event log errors and ASR/Blue Screen reboots occuring?

Check Device Manager to validate that you do in fact have the latest versions actually installed. VCagent and Support Pack may show you do have them installed, when they may not be.

Also check the versions on your nc373i adapters and nc373i Virtual Bus Device. I had two BL460c's blue screen on me this weekend because the adapter driver and virtual bus driver where not at the same level.

[KarimK]

Yes, i am still reciving errors in the event log and the occasional BSOD/ASR

i have checked in device manager and all drivers are correct.

Karim

[James Kennedy_4]

Other things you can try..

Onboard Administrator firmware to version 1.60

Boot to Firmware Maintanance CD 8.60 on blade to upgrade NIC Firmware and Hard Drive firmware.

[KarimK]

All firmware has been updtaed to latest versions using the Blade firmware matrix 1.61... :-(

will have to raise a call with HP..

[Matthews Nolans Transpo]

Hey,

I am currentloy experiencing the issue with the HP Proliant BL460c G1 Blade.

I only have one of these servers and have had the server doing reboots and what not. Luckily at night when no one is here.

Just wondering if anyone has had a succesful fix for this?

My Blade enclosure firmware is... 2.41 Feb24 2009 and my Blade is at 1.70 dec 02 2009.

It is running windows EBS 2008 if thats any help?

regards

Matthew Smith
I.T Sys Admin