Server Management - Systems Insight Manager
1748143 Members
3698 Online
108758 Solutions
New Discussion

Re: 3Par monitoring - No HP Document

 
manishk
Occasional Contributor

3Par monitoring - No HP Document

Need to know exact configuration steps to be done on 3Par devices so that it can be properly managed from HP SIM.

 

Not much relevant info on net. 

4 REPLIES 4
Tushar Bajpai
Trusted Contributor

Re: 3Par monitoring - No HP Document

For HPSIM 3Par is another SMI-S Enabled device and works the same way as others.

3Par Supports SNMP and is SMI-S compliant. you can make use of both the avaiable protocol to

monitor the storage device with correct SNMP Community String and WBEM Creds.

 

 

if it helped, award me Kudos or Points. Thanks :)

\T Bajpai
HP Employee

manishk
Occasional Contributor

Re: 3Par monitoring - No HP Document

Hi Tushar,

 

Thanks for your assistance.
But i need some document/link from HP to know the steps to monitor 3PAR devices.

Also no document is available for steps to configure other devices like CiSCO & Brocade switches and Left Hand storage nodes to properly monitor from HP-SIM.

It will be helpful if you can provide few links/docs regarding the steps.

 

Regards

Manish

Tushar Bajpai
Trusted Contributor

Re: 3Par monitoring - No HP Document

Please find the document attched for configuring 3PAR CIMOM.

After the cimom is configured, discover the device in HPSIM using the IP Address.

if it helped, award me Kudos or Points. Thanks :)

\T Bajpai
HP Employee

Bart_Heungens
Honored Contributor

Re: 3Par monitoring - No HP Document

Hi,

 

I have written a blog article on the steps on the 3PAR to enable monitoring inside HP SIM. I had to do this for several customers, works fine...

 

http://www.bitcon.be/?p=1875

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !