Server Management - Systems Insight Manager
1748094 Members
6002 Online
108758 Solutions
New Discussion юеВ

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

 
SOLVED
Go to solution
EMIL_AGUIL
Occasional Advisor

HP SIM Systems Insight Manager 7.5.0 - Windows

Hi.

I deployed a SIM 7.5 and everything was OK but two days after I had a trouble with my conectivity. after that 90 servers show as critical "Management Processor status" in the cathegory all servers. and in Health state show as critical in All Management Processors.

How can I update the status of "Management Processor status" and "Health state".
I validated the status of my servers and are OK.

Regards.

10 REPLIES 10
upAndup448768
Frequent Advisor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

I believe you also have to "clear" the Event before the alerts go away.

Andrew_Haak
Honored Contributor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

Hello,

Can you post a screenshot of your SIM server? The screen with HS, MP SW and ES should do. Is the status of either orange or critical?

The HS should be green ES can be anything. The HS status is the hardware status and ES is the event status. So in short you have 4 statuses for your server.
Kind regards,

Andrew
EMIL_AGUIL
Occasional Advisor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

I cleared all the events in the console and delete them and almost all my servers keep show as critical status.

In the user guide say this:

Status icon Status type Description
HP SIM can no longer communicate with the system. The system was
previously discovered but cannot be pinged. The system might be down, powered off, or no longer accessible on the network because
of network problems.

I connected to some iLO servers and I send a test traps and are resgister in the console inmediatly, so the communication is OK.

What else could I do?

Regards.

 

EMIL_AGUIL
Occasional Advisor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

Hi.

I Attach the screenshoot of my SIM server.

Thanks.

Regards.

 

 

EMIL_AGUIL
Occasional Advisor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

 

and this other printscreen.

 

Regards.

Andrew_Haak
Honored Contributor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

Right,

 

So youf real problem is that the ILO's are unreachable. If you look at your server the MP status is critical a MP is an ILO.  MP stands for management processor. Can you still ping your ILO's?

The Gen9 and Gen8 servers are discovered by the datacollection of an ILO. So if you can not poll your ILO the hardware status becomes undetermined.

Kind regards,

Andrew
EMIL_AGUIL
Occasional Advisor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

 

Thanks.

I tried to ping the iLO and you right. the servers are unreachable.

I┬┤ll check it.

Best regards.

 

Andrew_Haak
Honored Contributor

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

Hello again,

 

The server is probably up but the ILO is not, is the AMS agent also installed? This agent relays OS info for the server on behalf of the ILO. Since you have servernames you probably have an AMS agent installed. Check if the ILO is configured to send traps to the SIM server, you need to configure this to get events. Also configure to send the OS name instead of the ILO name, this way events get mapped to the server instead of the ILO.

 

Good luck!

Kind regards,

Andrew
EMIL_AGUIL
Occasional Advisor
Solution

Re: HP SIM Systems Insight Manager 7.5.0 - Windows

 

Thanks for your help.

my issue was for a bad  route table of one interface.

 

Kind regards.