Servers and Operating Systems
Have questions about servers and operating systems? Find information, share knowledge, and discuss solutions with these HPE Community blogs and forums.
1849291
Members
5715
Online
104042
Solutions
Latest Articles and Discussions
RHEL 8 - Thin provisioning not surviving after reboot
Posted to: Operating System - HP-UX
a week ago I have the linux installed in an DL360 gen10 with the following configuration:sda and sdb, has the linux itself in RAID-1 (software)sdc is 6x SAS disk manager by p408i in RAID-5 (8T)I create a th ...
0
Kudos
128
Views
3
Replies
New iLO security features in Gen12 servers??
Posted to: ProLiant Servers (ML,DL,SL)
a week ago We just got a brandnew DL380 Gen12 and I'm struggling a bit with the new iLO password policy.As usual we reset everything to factory defaults (BIOS and iLO) and give the iLO our new internal stan ...
0
Kudos
92
Views
0
Replies
HP ProLiant DL360 Gen10 CPU Upgrade - CPU Cooler Upgrade necessar ...
Posted to: ProLiant Servers (ML,DL,SL)
a week ago Hey guys,i inherited a DL360 Gen 10 with a Xeon Silver 4208 (8 Core) and would like to upgrade the system to a 16 Core CPU, e.g. the Xeon Gold 5218 with 125 Watt TDP or the Xeon Silver 4216 ...
0
Kudos
163
Views
1
Reply
Notice: HPE Synergy - Deprecating Delivery of New HPE Synergy Cus ...
Posted to: HPE Synergy
a week ago Notice: HPE Synergy - Deprecating Delivery of New HPE Synergy Custom Images and Certified Vendor Add-onsI looked through this notice and I'm trying to understand the reason behind this change. In ...
0
Kudos
640
Views
2
Replies
HPE ProLiant ML350p Gen8 Not working with E5-2600 v2 CPU series
Posted to: ProLiant Servers (ML,DL,SL)
a week ago System health light is blinking red after booting with E5-2697 v2 CPUs.What i've done before installing them:1. Updated the BIOS to the latest version (P72 05/24/2019)2. Followed the instruction ...
0
Kudos
266
Views
5
Replies
TCIP$CONFIG menu issue after upgrading OpenVMS 7.3-2 to 8.4 " ...
Posted to: Operating System - OpenVMS
2 weeks ago ***RESOLVED***. I followed a post from different forum post and ran the following command: MCR SYSMAN IO CONNECT MPA0: /DRIVER=SYS$PIPEDRIVER /NOADAPTETR /LOG=ALL Hello All,I am upgrade ...
0
Kudos
80
Views
1
Reply
