HP ProLiant DL380p Gen8

[wayneprecious]

Hi All,

For the past few days, one of my servers rebooted and is now stuck on Power and Thermal Calibration Complete Screen,

I am completely out of ideas.

Any help would be appreciated.

Thank you

Wayne

[sudhirsingh]

Hi,

Few suggestions:

1. Update all the firmware and drivers to latest. (Makesure BIOS and ILO updated to latest)

2. Unplug any USB devices/Disconnnect any KVM connected to it and check.

3. Check IML for any errors (Kindly Post here if does not work)

Hope this helps!

regards,

Sudhir

[wayneprecious]

Thank you for coming back to me, but i have been able to get past that issue now. 

Thie issue i am having now is that the server is not loaded my ESXi,

No activity on the drives at all.

I have pressed F8 during bootup to look at the smart array and i am getting the following error

Slot 0 HP Smart Array P420i Controller

Module Critical Error

Action: Replace Cache Module

Controller is disabled until this problem is resolved.

[wayneprecious · Accepted solution]

Just reseating the Cache Memory, trying to boot up now.

[wayneprecious]

I now have hard disk activity.

[wayneprecious]

All working

[sudhirsingh]

Glad to hear that.

Verify Cache and Battery Status under ILO, 

Hope all healthy.

Regards,

Sudhir

[WafflesMcDuff]

---

@wayneprecious wrote:

Thank you for coming back to me, but i have been able to get past that issue now. 

Can  you please tell us HOW you got past it?