hpe proliant Dl380 gen11

[DanielHadush]

i am not able to install Centos 7 on HPE Proliant DI380 gen11, can't read the disk

[support_s]

System recommended content:

1. HPE ProLiant DL380 Gen11 Server User Guide

2. HPE ProLiant DL380 Gen11 Server Carrier‑Grade Conversion Guide

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Mr_Techie]

@DanielHadush 

Check hard drive is compatible with the server.

Smart Array Controller firmware, HBA firmware, Expander backplane SEP firmware, and System ROM are up to date

Check for any loose connections and ensure the drive or backplane is cabled properly 

Review the drive LED statuses to ensure they indicate normal function

Try power cycling the server

If using an array controller, ensure the drive is configured in an array. You can use the HP Smart Array BIOS utility or the HP Array Configuration Utility from the Intelligent Provisioning menu

Check correct controller drivers are installed and that the controller supports the hard drives being installed.

I hope these suggestions help. 

[support_s]

Hello,

Let us know if you were able to resolve the issue.

If you are satisfied with the answers then kindly click the "Accept As Solution" button for the most helpful response so that it is beneficial to all community members.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

[DanielHadush]

@Mr_Techie 

i am not able to install Centos 7.6 sepecfically on HPE Proliant Dl380 gen11 but other OS and Versions i can install.