Ram Upgrade Old ML 350 G6

[Alemoris]

Hi everyone,
I'm upgrading an old ML350 G6 server, dual Xeon E5645 CPU, with Windows Server 2019, x64 installed.
I installed two banks of ram, 32 gb each, DIMM: DDR3-10600 (PC3-1333), the operating system sees them correctly, total 64 gb. Every
dimm is inserted in slot A, Ch1, of each bank, white slots.

Now I have added two more banks of identical Dimm, another 2x32 gb., In the white slots of the ch2.
The BIOS sees them correctly, for a total of 128 gb, but Windows, in the system properties, sees 128 gb, but only 64 usable. I have disabled the maximum available memory limit, in msconfig, but nothing has changed.

Some idea?

[Suman_1978]

Hi,

Please refer to the following document for help in configuring memory.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c01727710
https://www.hpe.com/psnow/doc/c04200238.html

Thanks

[Alemoris]

Thanks for your reply, I followed the linked guide when I installed the RAM. My configuration comes from what is suggested here.

Currently my setup is this: https://ads.adve.it/test/svr/ram.png