StoreEasy Storage
1745804 Members
3616 Online
108722 Solutions
New Discussion юеВ

Can FC10 disk arrays be daisy-changed

 
frederick hannah
Super Advisor

Can FC10 disk arrays be daisy-changed

I have two seperate banks of FC10 disk arrays. Each of my two servers can see ONE bank, but for flexiblity I would like BOTH servers to see disks of BOTH arrays at the same time. Is this possible? Currently I have one SC-SC cables connecting both arrays to each other, with another set of SC-LC cables connecting the arrays to the servers.
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Can FC10 disk arrays be daisy-changed

The FC10 is a JBOD, not an array (not intelligent) - yes, you can share this jbod between 2 servers (with some requirements).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
frederick hannah
Super Advisor

Re: Can FC10 disk arrays be daisy-changed

What reqs are we referring to?
Torsten.
Acclaimed Contributor

Re: Can FC10 disk arrays be daisy-changed

This may help:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/lpg28397/lpg28397.pdf

HP SureStore E
Disk System FC10
User Guide

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!