DL380 G5 with P400 - RAID-1

[peyrache]

please try to configure raid0+1 with 2 disks
then after mirror created hot remove one member and check if datas on remaining disks are still available, if yes you are created a true raid 1 configuration
is it clear ?
JYP

[Fasihuddin Mohammad]

Here are Oracleâ s recommendations for RAID storage:
You can see they says Avoid RAID 1+0 where the Redo and Archive logs are there.

RAID DatabaseFile RedoLog ArchiveLog
0 OK Avoid Avoid
1 OK Best Best
1+0 Best Avoid Avoid

So What do you say about this?

[Uwe Zessin]

I say that you make no attempt to understand that is not a technical problem - just a small terminology problem with the SmartArray software as I have written in my first response. Have a nice day.

[peyrache]

please check documentation page 82
the note say:
when there are only 2 physical drives in the array, this fault tolerance method os often referred to a RAID 1.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf

JYP