StoreEasy Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Service Release taking long time

 
Highlighted
New Member

Service Release taking long time

I am applying Servcie Release 5.5 to my DL380 G4 Storage Server. It has been running over 2 hours w/ ~50 cpu activity and smoe activity on disk drives (no users connected). How long should this process take? I just completed rebuilding w/ QuickRestore DVD. I will apply SR 6.4 after this completes.
8 REPLIES 8
Highlighted
Respected Contributor

Re: Service Release taking long time

depending ..
did you run from console or remotetly
JYP
Highlighted
New Member

Re: Service Release taking long time

I am running the update from a local console session.
Highlighted
Respected Contributor

Re: Service Release taking long time

so i assume directly from Nas'console
and also SR is loaded from local DVD/CD drive ?
one trick may be not faced with is during
SR run, network driver are updated so
if you have SR package remotely, you loose connection and never resume it
JYP
Highlighted
New Member

Re: Service Release taking long time

I let the server run over night w/ no change. After forcing the update task (via Task Manager) to close, it continued on as I would have expected. Looks like I am OK at the moment, but not sure what got hung up??
Highlighted
Respected Contributor

Re: Service Release taking long time

well normally you should have a small icon
on desktop after installation double click on
should check if service release as been correctly installed
is it the first service releases installed on this machine ?
JYP
Highlighted
New Member

Re: Service Release taking long time

Yes, this was the first SR I applied after rebuilding using Quick Restore. I am now haing trouble trying to install SR 6.4. I am able to access DVD locally, but it indicates some folders are encrypted? Currently I am progressing OK by remoting to a UNC attached drive from my laptop where I have placed the DVD.
Highlighted
Respected Contributor

Re: Service Release taking long time

best way is to install SR56 first then 6.4
JYP
Highlighted
Respected Contributor

Re: Service Release taking long time

you must have W2K3 SP1 in order to install SR6.4
JYP