1280/ssl1016 autoloader reconditioned

[stexlollo]

firmware UHDL version 40 from HP site (HP version image)

firmware DLT1 version 64 from HP site

in windows 2003 device manager i see
juke boxe: hp storageworks ssl1016 SDLT autoloader driver version 2.5.1.0

unita' nastro: Compaq DLT1 tape drive

from ltt 4.7 all test are ok and i see UHDL and tape with the same target id 5 but LUN not the same

controller AHA2940U2W firmware version 2.20

my problem is with backup software Microsoft Data Protection Manager 2007 sp1:
my hardware is a tested hp hardware with dpm07
but i see in LIBRARY section of dpm07 1 unit lwith the same name in windows device manager and 1 stand alone unit with tape name in windows device manager.So 2 units and not 1 library with a sub tape unit: same target 5 scsi, lun 1 for library ,lun -1 for tape

multi lun is enabled in Adaptec

Any suggestion? must i upload COMPAQ version 40 firmware from HP site, to see the Juke Boxe correctly in DPM07 and windows?
any link to download the driver from Quantum for the UHDL tested from HP with DPM07?
Here the versione for ssl1016 library that i can't find anywhere:
QsmcX32.sys/QmCox32.dll, 9/8/2006, 2.2.5.0, signed, 32bit