StoreEver Tape Storage
1748011 Members
4415 Online
108757 Solutions
New Discussion юеВ

Re: Code Error D8 07 : mechanical problem

 
YounesMaroc
New Member

Code Error D8 07 : mechanical problem

Hi every body,

I have just buy a new HP Tape Autoloader DAT 72x10, I started but it displayed an error with D8 07 as code of error. Please if you have any idea to resolve this problem


Thanks in advance
4 REPLIES 4
Torsten.
Acclaimed Contributor

Re: Code Error D8 07 : mechanical problem

Maybe a stupid question, but did you remove the shipping lock?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
YounesMaroc
New Member

Re: Code Error D8 07 : mechanical problem

I did not remove it, it is located where?
Torsten.
Acclaimed Contributor

Re: Code Error D8 07 : mechanical problem

On the top cover in the middle. Refer to the manual for a picture ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
YounesMaroc
New Member

Re: Code Error D8 07 : mechanical problem

Thank you very mutch, it's OK