StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Data protector Express 3.50-sp2 backup problem

 
Highlighted
New Member

Data protector Express 3.50-sp2 backup problem

Hi,
I have sceduled an ordinary backupjob. Only backup of ordinary files. The backup starts, reports 1 count feiled, and runs "forever". When I stop the job, the log says:


Job name: XXX
Job type: Backup
Product: Data Protector Express 3.50-sp2 - 34497

Logging mode: Full logging, failed and completed objects
Backup mode: Full
Auto verify mode: Full verify
Write mode: Overwrite all media
Span mode: Restart file
Change mode: Prompt for another media

Pass type: Backup
Selected: 454 objects, 14 MB
Completed: 454 objects, 14 MB (100%)

Pass type: Auto Verify
Selected: 454 objects, 14 MB
Warnings or errors: 1 objects, 0 bytes (0%)

Task failed: Error 66: Operator cancelled
Selected: 454 objects, 14 MB
Completed: 453 objects, 14 MB (100%)
Warnings or errors: 1 objects, 0 bytes (0%)

I have testes by differend selections, because I first tought it was a file that was always open, but this error occures with any selection I choose.
3 REPLIES 3
Highlighted
Honored Contributor

Re: Data protector Express 3.50-sp2 backup problem

That one file with the warning is hanging everything up. It might be a corrupt file.

If you page though all of the log pages (use the Next Page button or print it out)you should see all 453 objects that passed and the one object that failed. An alternative would be change your logging to "Failed Opjects Only" (the default) and the log should be shorter.

DL
Highlighted
New Member

Re: Data protector Express 3.50-sp2 backup problem

Thanks for your help. It is hard for me to look into the log because I had to cancel the job, and all there is in the log is: Error 1610 building of job log is halted.

I am now trying the hard way, putting on one by one directory.
Highlighted
Honored Contributor

Re: Data protector Express 3.50-sp2 backup problem

Check to make sure that the volume where Data Protector Express is installed has at least 2GB of free space. (usually c: for MS Windows)