StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Data Protector Express dplinsvc listening on 2 network interfaces

 
SOLVED
Go to solution
Highlighted

Data Protector Express dplinsvc listening on 2 network interfaces

Hello,

I want to manage my Data Protector Express (installed on a Linux server) from a windows workstation. The Backupserver has eth0 and eth1 connected to different subnets.
The Windows machine is connected to eth1 subnet.
The server prozess dplinsvc listen only on the first network card eth0, so I canot access the
managment gui from the windows machine with error message (Code 129):

Data Protector Express kann keine Verbindung zur Primärinstanz des Domänenservers herstellen. Überprüfen Sie, ob Domänenname und IP-Adressenkonfiguration korrekt sind und ob der Domänenserver ausgeführt wird.

How can get the dplinsvc prozess listen to both networks?
3 REPLIES 3
Highlighted
Trusted Contributor
Solution

Re: Data Protector Express dplinsvc listening on 2 network interfaces

If you want to use 1 network card then just add the line

binTo=ipaddress

stop the service, go to dpconfig.ini

then add the line like this


lastUser=admin
nodeGuid={00001001-48873788-0005F208-FFED8B55}
nodeName=ALVARJOS01
databaseServerAddress=localhost
isDatabaseServer=Yes
databaseServerName=El Diablo
disableNetwork=No
remoteAdmin=No
bindTo=16.90.105.198



save start service and there you go.

Pablo Alvarado Siles
Pablo Alv Siles
Highlighted

Re: Data Protector Express dplinsvc listening on 2 network interfaces

Thank you for quick help, is the bindTo Parameter explained in the manual?

Regards

Norbert
Highlighted
Trusted Contributor

Re: Data Protector Express dplinsvc listening on 2 network interfaces

No there was not in the user guide. Its on Hp I didn't knew that but I found it here it is:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3436879&prodTypeId=18964&objectID=c01388955

Pablo Alvarado Siles
Pablo Alv Siles