StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DataVerification

 
Highlighted
Super Advisor

DataVerification

I have a MSL6480 with two expantion (240 slot total)

Have command view version 5.4 and license for the 300 slots

I have a dataverification partition with 1 drive and 5 slots (minimum configuration)

I have three othe r partition.

I have to use dataverification to verify all tha available slot in the library

How I do make the dataverification

By selecting all the slots an applying the policy ?

The dataverification partition (DVP) have to be zoned ?

rperez

 

rperez
3 REPLIES 3
Highlighted

Re: DataVerification

Please refer to below article page number 87.

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03788698-4.pdf

 

 

 

Highlighted
Super Advisor

Re: DataVerification

Thank for reply

On page 88 I see

-Unassign the tape drives that will be used for Data Verification from their current partition.

-Unassign the storage slots that will be used for Data Verification from their current partition.

Question

Only free drives and free slots (drive and slots that are not part of other partition) can be in the DVP partition?

 

If yes

How DVP verify the other slots that are in the other partition to provide an automated process to validate media readability and data integrity of backup data cartridges?

Thank you

rperez
Highlighted

Re: DataVerification

Please find the link for the command view user guide and from the page number 41.

There is a detailed steps how to configure the drives and tapes for the data verification.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c05065530

 

Data verification depends on couple of factors like Command view version minimum version is 3.5

And also this is a licensed feature.

Please feel free to contact hpe technical team to log a new case for further troubleshoot and get this feature working the way it is suppose to be.

 

 

 

Regards,

Ashoka S