StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DP 6 with Solaris 10 (SPARC)

 
Highlighted
New Member

DP 6 with Solaris 10 (SPARC)

We bought DP 6 a week back
I installed and configured it on Solaris 8
with a L180 tape library with 4 LTO 2 drives
it works fine, we need to run it on Solaris 10
so I installed it on Solaris 10 , it does not
when I do a autoconfigure devices it only pics the stty2 and show the LT180 changer without drives. I manual configure the drives via /dev/rmt/0b to /rmt/3b, When I do a scan it loads the tape from say slot1 to drive X, but with the unload it fails with the messages
device not found. Is this a know problem with a patch, or any suggestions ?
PS: on the same machine if I boot Solaris 8 it works 100 %

Thanks
1 REPLY 1
Highlighted

Re: DP 6 with Solaris 10 (SPARC)

You might want to ask your question in the Data Protector forum, Management software > OV Omniback/Data Protector:
http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=251