StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

DPE 4.0sp1 hangs at 10% during tape verify

 
Highlighted
Occasional Contributor

DPE 4.0sp1 hangs at 10% during tape verify

I recently configured a HP 1/8 G2 tape autoloader with a Ultrium 3 SCSI drive. It is attached to a AIO1200 storage server. I performed a full backup to one tape which completed the write process. The verify process gets to 10%, then unloads the tape into a storage slot and then stays idle. The verify process says "running" but nothing is going on. Any ideas?
2 REPLIES 2
Highlighted
Regular Advisor

Re: DPE 4.0sp1 hangs at 10% during tape verify

Hi Tim:

Does the backup job complete when not performing the verify option?

If you have the backup job log for your AIO1200 server, please attach it to this posting so that I can better understand your problem.

Dave W.
Highlighted
Occasional Contributor

Re: DPE 4.0sp1 hangs at 10% during tape verify

Hi Dave,
I have since solved this issue among others by replacing the scsi terminator. After much agrivation and time spent on the phone that is what we narrowed it down to. Thank you for your reply!

-Tim