HPE Community
StoreEver Tape Storage
1753496 Members
4438 Online
108794 Solutions
New Discussion юеВ

Driver for Quantum LTO 4 HH in HP UX 11.23

 
Sandeep Vijayan
New Member

тАО11-27-2009 12:52 AM

тАО11-27-2009 12:52 AM

Driver for Quantum LTO 4 HH in HP UX 11.23

Dear All
I have installed HP rx 2660 sevrer with Quantum LTo 4 drive , but not able to configure the LTO 4 drive, Plslp to get the correct driver for this. While scanning with ioscan , this is shown as UNCLAIMED device

details

Server: RX2660
O/S : HP UX 11.23
Tape Drive : Quantum LTO 4 HH with SAS interface

thanks in advacne

Sandeep
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО11-27-2009 03:42 AM

тАО11-27-2009 03:42 AM

Re: Driver for Quantum LTO 4 HH in HP UX 11.23

First I would check if the stape driver is there

# kcmodule stape

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Sandeep Vijayan
New Member

тАО11-30-2009 05:33 AM

тАО11-30-2009 05:33 AM

Re: Driver for Quantum LTO 4 HH in HP UX 11.23

Hi Torston,

Thank you,
stape was not installed. problem resolved after installing it.
Thanks alot!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.