StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

e1200-3200 can not found driver

 
Highlighted
Advisor

e1200-3200 can not found driver

Dear all:

my tape library is MSL6060 with Ultra960*4,e1200-320 4GB FC card*2.
my server has HP FC2242 SR HBA card.

I connect cables as document Figure 9(as attachment). But in OS ,I only found two Drivers(bottomtwo), the top two drivers connect
with Control card can not be found by OS.
what is the problem?
2 REPLIES 2
Highlighted
Trusted Contributor

Re: e1200-3200 can not found driver

Dear Robben,

The e1200-320FC is a SCSI-fibre interface controller and does not require a device driver. You should see the devices under SCSI tape devices and a media changer. This is provided you have correctly cabled your tape library and configured the e1200-320fc. Depending on the backup application you may not need drives for the tape drive or media changer. Normally 'unknown media changer' is fine.
Some backup applications provide their own drives for the tape drives. (Eg. Symantec - Backup Exex.
Highlighted
Valued Contributor

Re: e1200-3200 can not found driver

in case your E1200 is cabled correclty and already detected by the host but you dont want it to be under "other devices" you can use this one.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=316040&swItem=co-44137-2&prodNameId=1849300&swEnvOID=1005&swLang=8&taskId=135&mode=4&idx=0
If the flop doesn't fit... go allin!!!