StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

eml103e w/Ultrium FC1840 tape drives not recognized by RHEL53

 
Highlighted
New Member

eml103e w/Ultrium FC1840 tape drives not recognized by RHEL53

Hello,

I have a new eml103e with 4 FC Ultrium 1840 tape drives connected through a Cisco 9124 fiber switch to a HP DL380 running RHEL 5.3. RHEL only recognizes a sg0 device, which is the medium changer, but has it listed as generic. It doesn't recognize the drives in any way. The DL380 has Qlogic fiber cards. Running SANSurfer on the server shows all ports on the eml103e. Fiber connectivity looks good.

Other than installing the OS, I installed HP's fc-enablement package for Linux. When I run lssg, it doesn't show anything. This looks like a driver issue, but I loaded the only software shown for the library, which is ltt from HP.

What could be the problem? Thanks.