StoreEver Tape Storage
1748123 Members
3407 Online
108758 Solutions
New Discussion юеВ

Error 105: Command not supported (HP Data Protector 6 Basic on Windows 2008 R2 64 bit)

 
bayusenoadji
New Member

Error 105: Command not supported (HP Data Protector 6 Basic on Windows 2008 R2 64 bit)

Dear Support I have error "Command not supported" when using HP Data Protector 6 Basic on Windows 2008 R2 64 bit I have attached error on this post Please help me.
2 REPLIES 2
mikael_salle
New Member

Re: Error 105: Command not supported (HP Data Protector 6 Basic on Windows 2008 R2 64 bit)

Hi,

 

I'm getting the exact same problem on a Vista 64bit or Windows 7 64bit.

 

Please HP, help us solve this issue.

 

Regards,

Mikael S├дlle

MKolman
Occasional Visitor

Re: Error 105: Command not supported (HP Data Protector 6 Basic on Windows 2008 R2 64 bit)

Hi,

 

I'm getting same problem on MS Win 2008 R2 64b.

 

I found problem is in VSS. With out VSS it is "working". But only incremental backup. Full backup without VSS is bit useless.

 

I still didn't found any solution how to fix VSS problem for HP DP6B

 

well I found one solution but for nova backup but it looks similar with our problem.

 

Error 105 Command not supported

This issue is directly related to problems with Microsoft VSS, and should be able to be resolved by doing the following:
 

Edit the nnconfig.ini file file and restart the NovaBackup Network service:

    1. Close NovaBackup Network 
    2. Stop the NovaBackup Network Service: 
    3. Open the nnconfig.ini file in the NovaBackup Network\Config directory 
    4. ([Install_Path]\config, by default) on the Master Server. 
    5. In the [configuration] section, add the following line: 
      [disableVamObjects] 
      Boot Configuration 
    6. Save and close this file. 
    7. Restart Service. 
    8. Start NovaBackup Network
I was trying this in dpconfig.ini but it is not working :(
hope HP will post here some solution.
Thank you